排油煙機

15 個商品

Range Hoods FAQ

The length of the air outlet pipe, the number of corners, the angle of bending and the sectional area size will affect the pressure of the air outlet pipe. So the total length of the air outlet pipe should not exceed 5 metres and the number of bend corners should not exceed 3 (both requires must be met at the same time), otherwise the suction will be weaker after installation.

1. The best place is above the ceiling, as it's safe and elegant.
2. 1.5m or more from the middle of the hob.

1. The smoke exhaust hole must be prepared. And the opening of the flue must be a round hole of 180mm in diameter.
2. Set aside 10A power socket.

The weight capacity of the wall must be considered for range hood installation. Holes can be punched directly on concrete brick walls. For hollow walls, the thickness of the solid layer of the hollow panel must be greater than 30mm, while the overall thickness of the wall must be greater than 80mm.

Intelligent venting function can detect gases: formaldehyde, ammonia, carbon monoxide, benzene, cigarette smoke, alcohol, hydrogen and other irritating gases.

On the one hand, it is related to the type of oil you use, grease pipeline of Fotile range hood is longer than others, so some easily condensable oil will condense in the grease pipeline and do not reach the grease cup. On the other hand, it is also related to the range hood usage frequency and the amount of oil. This situation will not affect the use of the range hood.

The range hood needs a 10A socket.

The labels for the side suction style range hood and European style range hood are on the top of the left side of the machine.

The longer the pipe is, the greater the pressure loss, and will result in a reduced suction.

The automatic cruise booster function is mainly designed for the smooth smoke extraction.If the flue resistance is large, the smoke is not smooth. After starting the automatic cruise booster function, it can automatically detect the resistance of the flue, and when the resistance of the external flue increases, the fan will automatically switch into the booster mode, which can help the grease discharging smoothly.

The diameter of the air outlet pipe of FOTILE range hood is 180mm. If the diameter of installed air outlet pipe is shorter than 180mm, the suction effect will be diminished and it will be noisy.

(1) Installing cabinet first and then range hood can prevent the hood from being installed unevenly.
(2) To avoid the bumping and to prevent dust and wood chips from falling into the range hood when installing the cabinet.
(3) To prevent the range hood from can't being removed later."

After installing the hood, all the protective film on the surface needs to be torn off. If it is removed a long time after installation, the surface color of range hood will become uneven. And the adhesive of the protective film left on the stainless steel surface will be difficult to clean.

The inner structure of the range hood is complex, in order to avoid damage to the machine during disassembly, please do not disassemble it by yourself, It's better to ask the professionals for operation.

(1) When using the range hood, you need to ensure the air circulation in the kitchen. And after each meal, the surface of the range hood should be cleaned in time. The regular cleaning of the range hood can effectively avoid dripping oil and oil leakage.
(2) Do not use rough tools such as cleaning cloths, wire balls or hard brushes, but use soft cloths when cleaning.
(3) It is strictly forbidden to use strong acid and alkali cleaners. Neutral cleaning agents are effective and cleaning the grease filter once every three months is required."

(1)Before installing the grease cup into the range hood, add a little water and a little detergent into the grease cup first, for easier cleaning.
(2)You can use white oil to remove handprints from stainless steel.
(3)You can use a wet towel with a little gypsum powder (old powder) to remove the yellow mark. The gypsum powder is available in paint stores."